Rally I trim ring

feeds@yuku.com (shifterkart26) — Wed, 16 Dec 2009 19:43:45 GMT

Looking for a 14" Rally I trim ring. Any out there? Thanks

H cam core for sale

feeds@yuku.com (Birdman) — Sun, 13 Dec 2009 12:50:15 GMT

I have a used H cam with several scuffed lobes but there is little wear and it would be a great core for grinding. Funny thing is, even though there is little wear on 3 lobes, this cam caused a drive line vibration that took more than a year to find!
Let's start out at $95?
Thanks!

Set of 6 rods

feeds@yuku.com (Birdman) — Sun, 13 Dec 2009 12:22:00 GMT

I have a clean set of OHC rods, $50 + shipping.
Please PM me. Thanks.

Good running 1967 6 OHC with Tranny COMPLETE come drive it!!

feeds@yuku.com (falconwagon62) — Mon, 07 Dec 2009 07:40:00 GMT

I just picked up a donor RUSTY 1967 Tempest, I am using as a donor car for my honey's 67 GTO, this thing runs and drives great, COMPETE running and driving, all alum goodies still on motor, it is NOT a Sprint 4 barrel, Power Glide tranny....Would like to sell Motor, Tranny as a set Asking $450 for all, or tade for stuff for her GTO....come drive it, runs smooth, no smoke...I will help with delivery within Ohio, Indiana and Kentucky, or Just ask....John 513-312-8799...

For sale: 1966 4BC Intake & Exhaust manifolds...

feeds@yuku.com (SPRINT 6 ) — Sun, 06 Dec 2009 08:25:29 GMT

1966 "Sprint" manifolds for sale.
Intake is perfect, Exhaust has heat gate removed. Replacement included.
One exhaust pipe flange bolt hole has small crack. I ran it like this for years.
Also included will be the correct mounting washers, thermo coil(choke), throttle linkage and gaskets needed to install this set.
$175.00 + ship.
USPS ground should be between $65/75 within the 48.

OHC FS from CP site...

feeds@yuku.com (SPRINT 6 ) — Sat, 05 Dec 2009 08:03:04 GMT

1966 TEMPEST 1966 Tempest OHC 6, Conv Prjct

arrowheadtoo

Wanted Alum. timing belt cover

feeds@yuku.com (kpayne5) — Thu, 03 Dec 2009 05:47:16 GMT

Engine is in the process of rebuild. I'm trying to think of things now that I might want to do. Any other ideas?

Sweet little 66'

feeds@yuku.com (SPRINT 6 ) — Sat, 28 Nov 2009 16:34:12 GMT

Found this on the web and thought I would post it.
Nice 66' Tempest droptop, Sprint Opt to boot
http://www.oldtimeclassics.com/CarDetail_26.htm

Mint '68 Sprint Intake

feeds@yuku.com (aarby) — Sun, 22 Nov 2009 18:09:30 GMT

I have a very clean, blasted and painted, '68 Sprint Intake for sale.

If your interested let me know and I can email out pics.

Need bracket for brake/clutch pedal

feeds@yuku.com (flyinbrian) — Sun, 15 Nov 2009 20:01:13 GMT

I bought new 69 brake and clutch pedals for my 69 Firebird but they don't fit the under dash mounting bracket in my car. Although the bracket is date stamped 6-20-69, it is a 1970 style which uses a bolt and nut to connect the pedals instead of a shaft with a retaining clip. I think 67-69 will work. Anyone have an extra one laying around they want to sell?
Brian

1969 Tempest OHC in OK, (ebay)

feeds@yuku.com (SPRINT 6 ) — Thu, 12 Nov 2009 09:25:32 GMT

Don't see 69's come up often...
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=110454583351&viewitem=&sspagename=STRK%3AMEWAX%3AIT

66 sprint manifold pair

feeds@yuku.com (68sprintbird) — Mon, 09 Nov 2009 21:34:05 GMT

http://cgi.ebay.com/ebaymotors/68-69-Pontiac-Firebird-4-Brl-Intake-4-1l-ohc-250-6cyl_W0QQcmdZViewItemQQhashZitem27acca5a2cQQitemZ170402667052QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

68' 250 4BC (sprint) engine. Northereast (ebay)

feeds@yuku.com (SPRINT 6 ) — Mon, 09 Nov 2009 02:51:24 GMT

Anyone need a complete engine.
9790*** casting# is a 68'

http://cgi.ebay.com/ebaymotors/Pontiac-OHC-SPRINT-engine_W0QQcmdZViewItemQQhashZitem4a9c1a217eQQitemZ320446538110QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Burrr, here comes old man winter... NOS-OHC Block Heater

feeds@yuku.com (SPRINT 6 ) — Sat, 07 Nov 2009 14:13:51 GMT

Since I no longer live up north, no real need to for this.
NOS OHC Block Heater. $30.00 shipped (North or South)
Just to be clear never installed/used.
GM Pt#984644

Wanted: 68/69 Sprint Exhaust Manifold and Rochester Q-Jet

feeds@yuku.com (aarby) — Thu, 05 Nov 2009 18:21:14 GMT

In need of :

1) 68/69 OE Sprint Exhaust Manifold
2) 68/69 Rochester Q-Jet (preferably Automatic Transmission will consider M/T)

Ship or P/U: Hartford, CT USA

looking parts

feeds@yuku.com (87Duker) — Fri, 30 Oct 2009 17:18:08 GMT

Looking for:
4 barrel manifold, prefer aftermarket but will use stock 4 barrel
sprint dual exhaust manifold
68 or 69 1 barrel head

Another screwed Cammer car...

feeds@yuku.com (SPRINT 6 ) — Sun, 25 Oct 2009 04:10:45 GMT

Hate to see any cammers get wasted.
http://cgi.ebay.com/ebaymotors/Pontiac-GTO-Tempest-GTO-66-1966-Tempest-GTO-Clone-roller_W0QQcmdZViewItemQQhashZitem3ca6c26c7bQQitemZ260495797371QQptZUSQ5fCarsQ5fTrucks

Wanted: Front CrankcaseCover

feeds@yuku.com (aarby) — Sat, 24 Oct 2009 05:39:15 GMT

Does anyone know where I can find a Front Crankcase Cover for a '69 250cid? Probably the same on all the OHC6's.

Thanks...

'66 OHC 230CID 1BBL Engine and Accesories, $200

feeds@yuku.com (aarby) — Thu, 22 Oct 2009 17:34:39 GMT

Found this in the local paper: Hartford, CT

http://hartford.backpage.com/AutoPartsForSale/_200_1966_231cu_ohc_6_cylinder_engine_only/classifieds/ViewAd?oid=2636864

67' OHC Tempest FS in; flying under the radar

feeds@yuku.com (SPRINT 6 ) — Mon, 19 Oct 2009 02:22:25 GMT

North Dakota:
Found this ad while looking for something else.
Look down the list for the 67'
Thought someone may be interested.

Classifieds